VITTORIA - 27.5" E-MAZZA
Traction without limits.
The e-bike version of the Vittoria Mazza raises the bar on e-Enduro performance for mixed terrain! Starting with a defined center tread, the e-Mazza uses deep siping in the direction of rotation, allowing the tyre to roll fast while still opposing drift. The stepped leading edge rolls like a ramp, but digs in on climbs, making e-Mazza a top choice for both front and rear use.
Substantial room was designed into the center tread to provide braking traction, while also accelerating cleaning. Cornering on the e-Mazza is handled by Vittoria’s trademark progressive sipe width technology, which gives a gummy inside effective edge, but without the instability that competitors experience on the outside of the tread.
e-Mazza’s generous tread depth claws into a range of terrain, and is stabilized with Vittoria’s proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky, while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance, and increased wear life.
- Aggressive profile with ample sipe spacing for mixed terrain
- Graphene 2.0 compound reduces rolling resistance, increasing range and battery life
- Progressive sipe-width pattern provides tactile grip at the knob surface, without sacrificing speed or grip
|27.5||2.4||60-584||Tubeless 2-Ply Reinforced||Enduro||Nylon 120 TPI||Black||1200g|
|27.5||2.6||65-584||Tubeless 2-Ply Reinforced||Enduro||Nylon 120 TPI||Black||1300g|
Enduro is the strongest and most robust casing from the Vittoria MTB line. It features a double-layered Nylon 120 TPI breaker covering the casing from bead to bead for increased puncture protection. The anti-pinchflat rubber inserts placed over the beads prevent damages at the bead and sidewall level. The Enduro casing is compatible with tubeless set-up. The Enduro tyres use a 4 compounds (4C) tread powered by Graphene: the best compound technologies from Vittoria.
Vittoria 4C compound layering technology features separate base and surface compounds, in both the center and the side areas of the tread. This approach allows to fine-tune the flex of the tread-base and tread-surface separately, placing the correct hardness of the Graphene 2.0 compound exactly where it is needed for maximum cornering, climbing, rolling, and braking performance. In addition, durability and puncture protection are also improved, as the robust base compound resists punctures, and provides a stable base for deeper mountain bike treads.
Each of the 4 layers is comprised of different natural and synthetic rubber types, blended into the compound that works best for the intended use. This allows for endless customizations of each layer according to the tyre needs.